Windows Safe Mode stuck; Booting hangs or goes in loop

When yous try to boot your Windows OS in Condom Mode, just discover that the Windows Safe Mode is stuck at Please wait or Loading files screens or while loading classpnp.sys, disk.sys, amdkmpfd.sys, aswardisk.sys, etc files, and so this post offers suggestions that may help you lot get out of the problem.

Windows Safe Mode stuck

This Condom Mode error can occur due to several reasons including hardware failure, software corruption, corrupt files in the system, corrupt drivers, and bug with the BIOS. When your Windows 10 PC is stuck on some screen or message or it means that the Bone is unable to locate and load the arrangement files that are required for the process to complete. They could be system drivers or OS files – eg. classpnp.sys, disk.sys, amdkmpfd.sys, aswardisk.sys, etc files. For instance, classpnp.sys is a Microsoft Windows SCSI class system file that comes as part of the Windows OS.

Related: Windows is stuck in an endless reboot loop.

The chances are that since you cannot boot into Safe Style, you lot will not be able to boot in Clean Kick State or Normal Boot besides.

Well if you are in this situation, effort the following suggestions and see if something helps.

Disconnect your external hardware

Before you begin, disconnect your external hardware – eg USB mouse, external difficult drive, Bluetooth dongle for a wireless mouse, external cooler and any other device to your laptop or PC.

Kicking into Advanced Startup Options

To boot you into the Advanced Startup Options screen, press Shift and click Restart. Does this piece of work? If so, practiced. If you cannot so you need to use the installation media.

Now, since you cannot enter Condom Mode, then you have to boot into Windows ten with your Windows Installation Media or Recovery Drive and select Repair your computer to enter Troubleshoot > Advanced Startup Options.

Once here, yous can now utilize CMD to run commands. Yous may use a Windows 10 DVD or a bootable USB drive, or yous tin can burn Windows 10 ISO to a USB bulldoze using another computer so use it.

windows-10-boot 7

Once you haveaccessed the Advanced Options, you can apply several options offered beneath to resolve the issue.

Run Startup Repair
Run Arrangement Restore
Run Windows Update
Run Organization File Checker using CMD
Change Startup settings
Reset BIOS
Update BIOS.

1] Run Startup Repair

From the Advanced options screen, open Control Prompt and Run Startup Repair.

2] Run Organization Restore

If the trouble started recently, you lot can run Run System Restore and see.

3] Run Windows Update

From the Advanced options screen, open Control Prompt and run Windows Updates from the Control Line.

4] Run SFC and DISM browse

From the Avant-garde options screen, open Command Prompt and run System File Checker. It allows users to scan for corruptions in Windows organisation files and restore corrupted files.

5] Change Startup settings

Change Windows 10 Boot defaults

Click on the Modify Startup settings and restart to temporarily disable these 2 settings:

Disable commuter signature enforcement
Disable early-launch anti-malware protection.

Once the issue is resolved, remember to reverse the changes made.

Related: Safety Way not working; Cannot boot in Safe Mode.

7] Reset BIOS

If you take recently fabricated any change in BIOS and and then started facing this problem, maybe this is the time when you revert the change or reset BIOS settings to default values. To open up BIOS settings, you need to restart your computer and go along pressing F2 or F9 (based on the motherboard manufacturer). Once at that place, find out the corresponding selection and reset BIOS to default settings.